/* $NetBSD: installboot.c,v 1.3 2001/11/25 00:42:11 minoura Exp $ */
/*
* Copyright (c) 2001 Minoura Makoto
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <paths.h>
#include <err.h>
#include <sys/param.h>
#include <sys/disklabel.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include "dkcksum.h"
#define MAXBBSIZE BBSIZE
#define LABELBYTEOFFSET (LABELSECTOR*512+LABELOFFSET)
int nflag = 0, vflag = 0, fflag = 0, merging = 0;
int floppy = 0;
char rawname[PATH_MAX];
off_t bboffset = 0;
size_t bootprogsize;
size_t blocksize;
const char *progname;
const char *bootprog;
char *target;
char template[] = _PATH_TMP "/installbootXXXXXX";
u_int8_t bootblock[MAXBBSIZE];
struct disklabel label;
void usage(void) __attribute((__noreturn__));
int checkbootprog(const char *);
int checktargetdev(const char *);
int checkparttype(const char *, int);
void
usage(void)
{
fprintf(stderr, "usage: %s [-nvf] /usr/mdec/xxboot_ufs /dev/rxx?a\n",
progname);
exit(1);
/* NOTREACHED */
}
/*
* name で示されるブートブロックイメージファイルが読み込み可能で
* あることを確認し、そのサイズを大域変数 bootprogsize に入れる。
*/
int
checkbootprog(const char *name)
{
struct stat st;
if (access(name, R_OK) < 0)
err(1, "%s", name);
if (stat(name, &st) < 0)
err(1, "%s", name);
bootprogsize = st.st_size;
return 0;
}
/*
* ターゲットデバイスのチェック。
* name は "/dev/rsd0a" とかいう文字列のはず。
*/
int
checktargetdev(const char *name)
{
struct stat st;
/* 書き込み可能であることを確認 */
if (access(name, W_OK) < 0)
err(1, "%s", name);
/* キャラクタデバイスであることを確認 */
if (stat(name, &st) < 0)
err(1, "%s", name);
if ((st.st_mode & S_IFCHR) == 0)
errx(1, "%s: not a character special device", name);
/* パーティションが正しい範囲内にあることを確認 */
if (DISKPART(st.st_rdev) > MAXPARTITIONS)
errx(1, "%s: invalid device", name);
/*
* ターゲットが FD であれば floppy = 1 にする。
* HD の場合はこの後でオープンするデバイス名のパーティションの
* 部分を 'c' に書き換える。RAW_PART の値は 2 で、これは
* sys/arch/x68k/include/disklabel.h で定義されている。
*/
strcpy(rawname, name);
if (strncmp(name + strlen(name) - 4, "fd", 2) == 0)
floppy = 1;
else
rawname[strlen(name) - 1] = RAW_PART+'a';
/*
* それはそれとして、HD の場合でパーティションが c なら
* (この1つ前で 'c' にしたのはファイル名なので st はまだ
* 引数として渡されたデバイス名に対するもの) エラーにする???
*/
if (!floppy && DISKPART(st.st_rdev) == RAW_PART)
errx(1, "%s is the raw device", name);
return 0;
}
/*
* パーティションのチェック。
*
int
checkparttype(const char *name, int force)
{
struct stat st;
int fd, part;
/* オープンしてローデバイスであることを確認 */
fd = open(rawname, O_RDONLY | O_EXLOCK);
if (fd < 0)
err(1, "opening %s", name);
if (stat(name, &st) < 0)
err(1, "%s", name);
if ((st.st_mode & S_IFCHR) == 0)
errx(1, "%s: not a character special device", name);
/*
* part にパーティション番号を入れる。disklabel を取得してみて
* その中の最大パーティション番号よりも大きければエラーにする。
*/
part = DISKPART(st.st_rdev);
if (ioctl(fd, DIOCGDINFO, &label) < 0)
err(1, "%s: reading disklabel", name);
if (part >= label.d_npartitions)
errx(1, "%s: invalid partition", name);
/*
* ブロックサイズのチェック。
*/
blocksize = label.d_secsize;
if (blocksize < 512)
blocksize = 512;
if (blocksize > MAXBBSIZE)
errx(1, "%s: blocksize too large", name);
/*
* 先頭の1ブロックを大域変数 bootblock に読んでみて、一旦閉じる。
*/
if (read(fd, bootblock, blocksize) != blocksize)
errx(1, "%s: reading the mark", name);
close(fd);
/*
* 先頭の8バイトが "X68SCSI1" でなければ FD だと思うことにする。
* XXX: フォーマットされてないものと区別がつかないってこと?
*/
if (strncmp(bootblock, "X68SCSI1", 8) != 0)
floppy = 1; /* XXX: or unformated */
/* -f が指定されてなく HD の場合 */
if (!force && !floppy) {
/*
* ターゲットパーティションの fstype が FFS か LFS の
* どちらでもなければエラーにする。
*/
if (label.d_partitions[part].p_fstype != FS_BSDFFS
&& label.d_partitions[part].p_fstype != FS_BSDLFS)
errx(1, "%s: invalid partition type", name);
/*
* パーティションの開始位置(?)が 0 ではなくて 32768 バイト以下
* だったら小さすぎなのでエラーにする??
*/
if ((label.d_partitions[part].p_offset * blocksize < 32768) &&
label.d_partitions[part].p_offset != 0)
errx(1, "%s: cannot make the partition bootable",
name);
}
/*
* HD の先頭のパーティションか、FD なら現在の disklabel 情報を
* マージする。
*/
if (floppy)
merging = 1;
else if (label.d_partitions[part].p_offset == 0) {
merging = 1;
bboffset = 1024; /* adjusted below */
}
if (merging) {
struct disklabel *lp;
/*
* disklabel は、さっき1ブロック読みこんだブートブロックに
* 収まっているのでそれを大域変数 label にコピーしておく。
* で、チェックサムとって一致しなければクリアする。
*/
lp = (struct disklabel *) &bootblock[LABELBYTEOFFSET];
memcpy(&label, lp, sizeof(struct disklabel));
if (dkcksum(lp) != 0)
/* there is no valid label */
memset(&label, 0, sizeof(struct disklabel));
}
return 0;
}
int
main(int argc, char *argv[])
{
int c;
int fd;
progname = argv[0];
while ((c = getopt(argc, argv, "nvf")) != -1) {
switch (c) {
case 'n':
nflag = 1;
break;
case 'v':
vflag = 1;
break;
case 'f':
fflag = 1;
break;
default:
usage();
/* NOTREACHED */
}
}
argc -= optind;
argv += optind;
if (argc != 2)
usage();
/*
* (オプションの後の) 1つ目の引数がブートローダファイル。
* 2つ目がターゲットデバイス名。
*/
bootprog = argv[0];
target = argv[1];
/* ブートローダをチェックする */
if (checkbootprog(bootprog) < 0)
errx(1, "aborting");
/* 書き込み先デバイスをチェックする */
if (checktargetdev(target) < 0)
errx(1, "aborting");
/* 書き込み先デバイスのパーティションをチェックする */
if (checkparttype(target, fflag))
errx(1, "aborting");
/*
* HD で disklabel をマージする場合で、ブロックサイズが bboffset
* (この直前の checkparttype() でとりあえず代入したっぽい 1024)
* より大きければ、bboffset をブロックサイズに合わせる。何これ?
* ブロックサイズは通常 512 なのでここは偽になり bboffset は
* 1024 のまま??
*/
if (merging && blocksize > bboffset && !floppy)
bboffset = blocksize;
/*
* ブートローダのサイズがブートブロック用領域より大きければエラー。
* MAXBBSIZE はブートストラップ用領域だと思う。8KB。
* そっから bboffset を引くのは何?
*/
if (bootprogsize > MAXBBSIZE - bboffset)
errx(1, "%s: boot block too big", bootprog);
/* Read the boot program */
/*
* なんだかよく分からんけど、ブートローダを読み込む。
* 読み込む先は bootblock + bboffset。bootblock は大域変数で
* checkparrtype() が読み込んだブートブロックの先頭番地。
* それに bboffset だけ足したところにおく。
* bboffset って何?
*/
fd = open(bootprog, O_RDONLY);
if (fd < 0)
err(1, "opening %s", bootprog);
if (read(fd, bootblock + bboffset, bootprogsize) != bootprogsize)
err(1, "reading %s", bootprog);
close(fd);
/*
* マージが指定されてれば、ディスクラベルを上書きする。
*/
if (merging)
memcpy(bootblock + LABELBYTEOFFSET, &label, sizeof(label));
/* Write the boot block (+ disklabel if necessary) */
if (nflag) {
target = template;
fd = mkstemp(target);
if (fd < 0)
err(1, "opening the output file");
} else {
int writable = 1;
fd = open(target, O_WRONLY);
if (fd < 0)
err(1, "opening the disk");
if (merging && ioctl(fd, DIOCWLABEL, &writable) < 0)
err(1, "opening the disk");
}
bootprogsize = howmany(bootprogsize+bboffset, blocksize) * blocksize;
if (write(fd, bootblock, bootprogsize) != bootprogsize) {
warn("writing the label");
if (!nflag && merging) {
int writable = 0;
ioctl(fd, DIOCWLABEL, &writable);
}
exit(1);
}
if (!nflag && merging) {
int writable = 0;
ioctl(fd, DIOCWLABEL, &writable);
}
close(fd);
if (nflag)
fprintf(stderr, "The bootblock is kept in %s\n", target);
else
fprintf(stderr, "Do not forget to copy /usr/mdec/boot"
" to the root directory of %s.\n", target);
return 0;
}
|